How To Remove Varnish From Wood Floors
How to Remove Old Varnish from Woods Floors
New floor treatments won't attach or look prissy if the old varnish remains. Strip a floor using 1 of three methods: sanding (fourth dimension-consuming), chemical stripping (messy) and heat stripping. The method you chose depends on your condolement level and expertise. Safe and not-toxic strippers on the market can minimize danger when using them. Well-nigh of these are some sort of orange or citrus based product.
Sanding a Floor to Remove Varnish
Varnish removal is the first step to refinishing a floor
Step 1
Vacuum the flooring to choice up and droppings that might rip the sandpaper. Load the belt sander with the heavy grit paper. Put on the grit mask and turn on the sander, lowering information technology slowly to the floor. Immediately motility it smoothly up and downwardly in the direction of the wood grain.
Stride 2
Sand over each area until the varnish is gone. You will have to change paper very frequently every bit information technology will clog upwards with the old varnish and become less useful. Employ long even strokes and don't let the sander sit in ane place equally it will sand out a dip in the flooring.
Step three
Vacuum the dust up continuously to keep the room comfortable to work in and continue debris from the sandpaper. When the varnish is removed, change to medium grit paper and begin smoothing the surface in grooming for new floor handling.
Remove Varnish with Chemicals
Step 1
Vacuum the floors. Open window and clinch adequate ventilation. Put on the gloves and utilize the stripper in the direction of the grain. Let it stand the amount of time that is recommended on the package. The varnish should bubble up and away from the wood.
Step 2
Use the putty knife to loosen the bubbling of varnish. Scrape in the management of the wood grain removing curls of varnish and stripper. Dispose of the onetime varnish and reapply stripper to any areas where the varnish is still adhering.
Step 3
Wipe down the floor with mineral spirits to clean whatsoever vestiges of stripper. The mineral spirits will evaporate quickly leaving no remainder. Vacuum the flooring again and begin refinishing procedure.
Remove Varnish Using Heat Method
Step ane
Plug in the heat gun and turn it on. Hold information technology at an angle a couple of inches from the floor and move it upward and down in a pocket-size area. Varnish will chimera upwardly and loosen. Exercise not hold the gun too shut or the varnish will smoke and loose wood will fire.
Step 2
Apply the wood scraper to remove each small surface area of loosened varnish. Scrape downwards in a smooth motion. Don't printing hard or gouge the wood. Apply the sharpener often on the wood scraper blade. A precipitous tool works meliorate and is less probable to slip and make a marker.
Step 3
Repeat the heat gun process in pocket-size patches until all the varnish is removed. Load a belt sander with medium dust sand paper and sand down whatsoever rough patches or left over varnish. Vacuum the floor and prepare for refinishing.
Source: https://homesteady.com/how-7274973-remove-old-varnish-wood-floors.html
0 Response to "How To Remove Varnish From Wood Floors"
Post a Comment